Description
Designed to fit the Walther PDP series with a Trijicon RMR optic and a .100″ thick adapter plate.
These screws are designed with a tall screw head (by adding a slight shoulder and slightly domed top) to maintain proper drive depth. This makes the screw stronger than a standard flathead screw while adding a pleasing aesthetic. They are proudly machined by us In Montana, USA!
Screw Details:
- Material: Certified USA manufactured Grade 5 (6AL4V) titanium
- Head Angle: 82 degrees
- Head Diameter: .274″
- OAL: .430″
- Thread Length: .300″
- Drive: Machined six lug, T-10 torx
- Our titanium pistol optic screws are made to fit MOST standard size factory and aftermarket adapter plates with a .100″ thickness. HOWEVER, always check the clearances, to ensure the screws don’t protrude and interfere with the function of your firearm.
Note: We recommend the use of 1-2 drops of medium thread locker and a quality torque driver. Screws should be tightened to 12-15 INCH pounds. We use, sell and recommend Vibra-Tite.
Our screws are currently available in Natural and Darkness
Natural finish.. As machined finish bright titanium.
Darkness finish.. Blasted matte black DLC
Screws come in sets of 2 pieces!!!
