Description
These Optic Screws are designed to fit the Smith & Wesson M&P 2.0, OEM Slide Cut, with a Holosun EPS/EPS carry optic and mounting plate that is provided with the optic.
The set consists of 4 screws. 2 each mounting plate screws and 2 each optic mounting screws.
We have designed these screws to be correct for the Holosun EPS optic.
The Flat Head, base plate mounting screws, are threaded 6-32, have a 90 degree head angle, a .260″ head diameter and a .300″ overall length, to properly fit the Holosun counterbore.
The optic mounting screws are threaded 6-32, have a 90 degree head angle, a .260″ head diameter and a .265″ thread length, to properly fit the Holosun counterbore.
We have also designed our optic mounting screw heads to be taller, by adding a slight shoulder and a slight domed top. This allows us to maintain a proper drive depth. This makes the screw stronger than a standard flathead screw, while adding a pleasing aesthetic to the installed screws.
Our Titanium pistol optic screws are made to fit the S&W M&P 2.0 Slide. HOWEVER, Always check the clearances, to ensure the screws don’t protrude and interfere with the function of your firearm..
Our screws have a machined in six lug drive. They accept a standard T-10 size driver.
Our optic screws are 100% machined by us in Montana, and are made from Aerospace quality and certified USA manufactured Grade 5 (6AL4V) titanium.
Note: We recommend the use of 1-2 drops of Med thread locker, a quality driver and screws be tightened to 12-15 INCH pounds, using a quality torque wrench. *We use, sell and recommend Vibra-Tite*
Our screws are currently available in Natural and Darkness
Natural finish.. As machined finish bright titanium.
Darkness finish.. Blasted matte black DLC
