Description
PLEASE READ: As firearms manufacturers make changes in production, optic mounting screws/plate screws often change. BEFORE YOU PURCHASE OPTIC SCREWS FROM TiCONNECTOR, pay attention to the following:
- The exact dimensions of our screws are listed below. If you are uncertain about fitment on your personal firearm, it is your responsibility to determine if our screws meet your needs. We do not know the optic screw specs used by every brand/type/model of handgun.
- Optic screw sales are final! Measure first – then order.
Designed to fit the Glock Model 43X MOS with a Vortex Defender CCW, ST or XL optic and a .050″ thick adapter plate.
These screws are designed with a tall screw head (by adding a slight shoulder and slightly domed top) to maintain proper drive depth. This makes the screw stronger than a standard flathead screw while adding a pleasing aesthetic. They are proudly machined by us In Montana, USA!
Screw Details:
- Material: Certified USA manufactured Grade 5 (6AL4V) titanium
- Head Angle: 90 degrees
- Head Diameter: .220″
- Thread: M4x.7
- OAL: .415″
- Thread Length: .330″ – Should provide approximately .010″ clearance when paired with a .050″ adapter plate.
- Drive: Machined six lug, T-10 torx
- Quantity: (2) pieces
Our titanium pistol optic screws are made to fit MOST standard size factory and aftermarket adapter plates with a .050″ thickness. HOWEVER, always check the clearances, to ensure the screws don’t protrude and interfere with the function of your firearm.
Note: We recommend the use of 1-2 drops of medium thread locker and a quality torque driver. Screws should be tightened to 12-15 INCH pounds. We use, sell and recommend Vibra- Tite.
Our screws are currently available in Natural (bright titanium) and Darkness (matte DLC)
