Description
PLEASE READ: As firearms manufacturers make changes in production, optic mounting screws/plate screws often change. BEFORE YOU PURCHASE OPTIC SCREWS FROM TiCONNECTOR, pay attention to the following:
- The exact dimensions of our screws are listed below. If you are uncertain about fitment on your personal firearm, it is your responsibility to determine if our screws meet your needs. We do not know the optic screw specs used by every brand/type/model of handgun.
- Optic screw sales are final! Measure first – then order.
Designed to fit the Smith & Wesson M&P 2.0, OEM Slide Cut, with a Holosun 507c or 507comp optic.
These screws are designed with a tall screw head (by adding a slight shoulder and slightly domed top) to maintain proper drive depth. This makes the screw stronger than a standard flathead screw while adding a pleasing aesthetic. They are proudly machined by us In Montana, USA!
Screw Details:
- Material: Certified USA manufactured Grade 5 (6AL4V) titanium
- Head Angle: 90 degrees
- Head Diameter: .260″
- OAL: .550″
- Thread: 6-32
- Thread Length: .425″
- Drive: Machined six lug, T-10 torx
- Our titanium pistol optic screws are made to fit MOST standard size factory and aftermarket adapter plates. HOWEVER, always check the clearances, to ensure the screws don’t protrude and interfere with the function of your firearm.
- (2) pieces
Our titanium pistol optic screws are made to fit the S&W M&P 2.0 slide with a .100″ thick plate. HOWEVER, always check clearances to ensure the screws don’t protrude and interfere with the function of the firearm.
Note: We recommend the use of 1-2 drops of medium thread locker and a quality torque driver. Screws should be tightened to 12-15 INCH pounds. We use, sell and recommend Vibra-Tite.
Our screws are currently available in Natural (bright titanium) and Darkness (matte DLC)
