Description
These Optic Screws are designed to fit the 9mm and 40cal., Smith & Wesson M&P 2.0, OEM Slide Cut, with a Trijicon RMR optic.
We have designed these screws to be correct for the Trijicon RMR optic.
They have a 82 degree head angle and a .274″ head diameter, to properly fit the RMR counterbore.
We have also designed our screw heads to be taller, by adding a slight shoulder and a slight domed top. This allows us to maintain a proper drive depth. This makes the scew stronger than a standard flathead screw, while adding a pleasing aesthetic to the installed screws.
This screw is threaded 6-32 and will fit directly into your S&W M&P 2.0 slide, with a .100″ thick plate . It has an overall length of .685″, and a .550″ thread length. .
Our Titanium pistol optic screws are made to fit the S&W M&P 2.0 Slide, with a .100″ thick plate . HOWEVER, Always check the clearances, to ensure the screws don’t protrude and interfere with the function of your firearm..
Our screws have a machined in six lug drive. They accept a standard T-10 size driver.
Our optic screws are 100% machined by us in Montana, and are made from Aerospace quality and certified USA manufactured Grade 5 (6AL4V) titanium.
Note: We recommend the use of 1-2 drops of Med thread locker, a quality driver and screws be tightened to 12-15 INCH pounds, using a quality torque wrench. *We use, sell and recommend Vibra-Tite*
Our screws are currently available in Natural and Darkness
Natural finish.. As machined finish bright titanium.
Darkness finish.. Blasted matte black DLC
Screws come in sets of 2 pieces!!!
