Description
These Optic Screws are designed to fit the Smith & Wesson M&P 2.0, OEM Slide Cut, with a Holosun EPS/EPS carry optic and mounting plate that is provided with the optic.
The set consists of 4 screws. 2each mounting plate screws and 2each optic mounting screws.
We have designed these screws to be correct for the Holosun EPS optic.
The Flat Head, base plate mounting screws, are threaded 6-32, have a 90 degree head angle, a .260″ head diameter and a .300″ overall length, to properly fit the Holosun counterbore.
The optic mounting screws are threaded 6-32, have a 90 degree head angle, a .260″ head diameter and a .265″ thread length, to properly fit the Holosun counterbore.
We have also designed our optic mounting screw heads to be taller, by adding a slight shoulder and a slight domed top. This allows us to maintain a proper drive depth. This makes the scew stronger than a standard flathead screw, while adding a pleasing aesthetic to the installed screws.
Our Titanium pistol optic screws are made to fit the S&W M&P 2.0 Slide. HOWEVER, Always check the clearances, to ensure the screws don’t protrude and interfere with the function of your firearm..
Our screws have a machined in six lug drive. They accept a standard T-10 size driver.
Our optic screws are 100% machined by us in Montana, and are made from Aerospace quality and certified USA manufactured Grade 5 (6AL4V) titanium.
Note: We recommend the use of 1-2 drops of Med thread locker, a quality driver and screws be tightened to 12-15 INCH pounds, using a quality torque wrench. *We use, sell and recommend Vibra-Tite*
Our screws are currently available in Natural and Darkness
Natural finish.. As machined finish bright titanium.
Darkness finish.. Blasted matte black DLC
